Replacement A/C Hose lines don’t have to be from the Original Manufacturer!
In the past, it was difficult to find a supplier capable of doing AC hose repairs, but with today’s wide selection of high-quality fittings and hose, your replacement could be right here at ATC. The Air Conditioning System provides the desired cabin temperatures to ensure operator comfort. The AC hose is used to effectively transfer both liquid and gas between the components and should be inspected for leaks and either repaired or replaced ASAP, to ensure the system continues to perform as expected.
Today, many hose sets come with metal tube sections, some of which we offer. If no suitable fitting is available, using a hose to replicate the metal tube is the next best thing.
Our experience suggests using Aeroquip hose and E-Z Clip may hold an advantage over crimp fittings for replacing metal tubes. Aeroquip EZ Clip & Hose fitting is a simple option for making or repairing Air Conditioning hose lines on heavy-duty trucks, agricultural, construction and other industrial applications. No hydraulic equipment is needed. Rather, a simple, easy-to-use crimping plier enables quick and easy A/C Hose repairs in the field.
Each Aeroquip fitting comes with 2 Clips which slide over the hose and a Cage which locks into the fitting, goes through the cages and is secured with crimper pliers.
This example shows an OE Hose at the top and using 4 Aeroquip fittings and hose, we can quickly provide a quality solution for your application.
The reduced diameter hose enables tighter turns (but not right angles) without concern for “kinks” which would compromise the hose and AC system.
AC Hose Repair using Aeroquip EZ Clip Fittings and Hose is a quick solution for the quick turn around needs and mobile technicians. Providing even greater flexibility, when the E-Z Clip fitting is lubricated with a slight amount of refrigerant oil before it’s inserted into the hose, the direction/index of the fitting can be changed by rotating the fitting in the hose. Once the refrigerant oil used has dried (1-2 hours) the fitting can no longer be turned or re-indexed.