Tag: Eberspaecher Air & Coolant Heaters

Espar Cargo Heaters for delivery vehicles

Posted on March 24, 2024 - ESPAR, Heating

Preheaters for Vans, Multi-Temp Trailers & Trailer Bodies

Espar cargo heaters for vans, multi-temp trailers and trailer bodies. These Airtronic heaters operate as independent miniature furnaces that utilize it’s own small engine to produce and maintain warmth for temperature sensitive products. The heaters draw in room air or outside air, heat this up and then deliver it to the interior of the vehicle.
View brochure here

ESPAR Heater Tip – Regardless of the season, run the heater every month for a minimum period of 15 minutes. This will help the heater burn away any combustion residue in the burner chamber. It will ensure that the fuel in the lines to the heater does not gel and solidify and that the heater will start reliably when the heating season arrives.

AIRTRONIC D6L and D8L for Vans

  • Van bodies 20′ long, maintains 40°F (4°C) cargo temperatures.Espar Airtronic D6L Heater for Cargo applications.
  • Outside temperatures -20°F (-29°C)
  • Insulation – minimum 2″ polyurethane. 
  • Mounts inside the Cargo area.

AIRTRONICS ECHO5  and ECHO8 for Trucks

  • Straight Truck bodies 30′ long, maintains 40°F (4°C) cargo temperatures.  ECHO cargo heaters maintain cargo temperatures in trailer bodies, truck bodies and large vans without using engine heat.
  • Outside temperatures -20°F (-29°C)
  • Insulation – minimum 2″ polyurethane.
  • Mounts above the cabin on the Nose of the Cargo area.

 


The most important advantages:

  • Electronically controlled temperature regulations which maintain optimum cargo area temperatures.
  • High volume heat output which provides faster heat recuperation after stops high air flow ensures good even heat distribution.
  • Independent of engine heat, low power draw reduces demands on batteries.

Need an Espar heating solution for your Application?

Arctic Traveler Canada (ATC) is proud to be an Eberspaecher Master Stocking Distributor (MSD) and offers the complete range of Airtronic and Hydronic Heaters. Whether you need one heater or a skid load, replacement parts or technical support on any Eberspaecher Airtronic and Hydronic Heater, contact us. 

We look forward to showing you how 50+ years of experience can add value to your company’s bottom line!

Arctic Traveler Canada, the mobile climate control specialist – Call 1-800-295-4156 for more information.

Read more about Eberspaecher heaters at the links below.
Eberspaecher heaters updates make them even better
Preheating from Eberspaecher
Eberspaecher D5 S3 Heaters
Eberspaecher Hydronic heaters

Espar Heaters: Updates make them even better

Posted on October 5, 2021 - ESPAR, Heating

Airtronic S2/M2 – The new Airtronic family

The new Airtronic family is the logical further development of the successful Eberspäecher air heater. With its robust components and the latest control system, the Airtronic now features both functional expansions and a longer service life.

The new heaters are equipped with automatic altitude adjustment as standard. A new brushless motor has extended the service life to 5,000 hours. This new motor, a modern control system and the use of the latest metering pump technology also improve the acoustics. Furthermore, the new Airtronic uses the pioneering Eberspäecher CAN bus technology.

Advantages:

  • Interfaces: CAN, LIN (only 12 V), S+Introducing the S2/M2 - A new brushless motor extends the service life to 5,000 hours, automatic altitude adjustment and the latest metering pump technology also improve the acoustics.
  • Service life 5,000 h
  • Brushless motor
  • Use of the latest EasyStart Pro and EasyStart Web control units
  • Diagnostics and parameter assignment via EasyScan
  • Starting capability down to –46 °C
  • Stepless heating performance control
  • Noise emissions optimized
  • Use of acoustically improved metering pump
  • Integrated altitude sensor:
    – Automatic altitude adjustment up to 3,000 m
    – Optimized combustion

Additional features:

  • Universal installation kit for all versions
  • Air scoops provided separately to the installation kit
  • Metering pump included in delivery with Airtronic S2/M2
  • Identical to Airtronic 1:
    – installation positions
    – repair and spare parts
    – installation space and mechanical interfaces (air, exhaust and combustion air)
  • Heating-air connection diameters:
    – 2 kW: Ø 60 mm and Ø 75 mm
    – 4 kW: Ø 75 mm and Ø 90 mm
  • ADR compatibility of the 24 V versions

Hydronic S3 Economy/Commercial – now even more versatile

The CAN/switching plus version of the Hydronic S3 Economy is the direct successor to the previous CAN/LIN version and is compatible with the Eberspäecher EasyStart CAN-bus-compatible control unit family that will be available.

The new switching plus input also ensures compatibility with all other control units that output an S+ switch-on signal. The new Hydronic S3 Commercial rounds off the product family with a 24-volt version for commercial applications. Its also available in a 5.6 kW Power version for commercial applications for the first time, making it unrivaled on the market.

Advantages:Eberspaecher Hydronic S3 Commercial

  • Interfaces: CAN and S++
  • Economy: service life 3,000 h 
  • Commercial: service life 5,000 h
  • Compatibility with all new and many conventional control units
  • New 24-volt heater for commercial applications
  • NEW: Power version with 5.6 kW heating performance
  • Very large output range
  • Utilization of residual heat through heating circuit run-on control
  • Stepless heating performance control
  • Noise emissions optimized

Additional features:

  • Economy: gasoline (also E10) and diesel (also B30)
    Commercial: diesel (also B30)
  • Diagnostic display via EasyStart TP 7.1 control units, as well as via EasyStart CAN-based control units
  • Economy: suitable for altitudes up to 1,500 m above sea level; altitude adjustment can be activated manually above 1,500 m with EasyStart Pro
    Commercial: automatic altitude adjustment up to 3,000 m above sea level
  • Connection diameters: water 20 mm, exhaust gas 24 mm, combustion air 20 mm
  • ADR compatible with EasyStart Pro (with “Commercial” version)


ESPAR Heater Tip – Regardless of the season, run the heater every month for a minimum period of 15 minutes. This will help the heater burn away any combustion residue in the burner chamber, prevents corrosion in the waterjacket and decay of “O” rings. It also ensures that fuel in the lines to the heater does not gel and solidify and that the heater will start reliably when the heating season arrives.

Need an Espar heating solution for your Application?

Click to view more info or Call 1-800-295-4156 for more information.

Arctic Traveler Canada (ATC) is proud to be an Eberspaecher Master Stocking Distributor (MSD) and offers the complete range of Airtronic and Hydronic Heaters. Whether you need one heater or a skid load, replacement parts or technical support on any Eberspaecher Airtronic and Hydronic Heater, contact us. We look forward to showing you how 50+ years of experience can add value to your company’s bottom line!

Preheating from Eberspaecher

Posted on August 10, 2021 - ESPAR, Heating

Eberspaecher’s AIRTRONIC Air Heaters

Eberspaecher’s air heaters are independent of both the engine and the vehicle’s own HVAC system. They draw in either cool room air or outside air, heat this up and then deliver it to the interior of the vehicle. Air heaters are an excellent option for commercial vehicles of every type.

Eberspaecher’s HYDRONIC Coolant Heaters

Eberspaecher’s coolant heaters work independently of the engine and thus offer a double plus: preheating the vehicle’s passenger compartment as well as the engine. The heaters are integrated into the cooling system of the engine. The thermal energy gained is then distributed through the vehicle’s own heat exchanger as forced hot air and this heats the interior of the vehicle via existing air vents. The engine is warmed up with the residual heat in the coolant.

Heaters for Commercial and Industrial Applications

Eberspaecher Air and Coolant heater kits can be customized to suit your specific needs. From units that are boxed for protection to controllers that can provide flexibility to your operation! These heaters are Bio Diesel Compatible and available in both 12 or 24 volts. ATC is your MSD for preheating solutions on a variety of applications. Espar Airtronic & Hydronic heaters from 7500-120,000 BTU's

  • Eliminate cold engine starts
  • Reduce idling fuel cost
  • Engine and fluid preheating
  • Cab and compartment heating
  • Minimize diesel exhaust emission
  • Defrosted windows
  • Crew shelter
  • Automatic altitude adjustment
  • CARB approved / EPA verified


AIRTRONIC D2, B4, D4, D6, D8 and Echo Cargo Heaters

AIRTRONIC units range from 2 kW / 7,500 BTUs to 5 kW / 18,800 BTUs and are available with our Digi-controller, which has an internal ambient air temperature sensor for precise compartment heating. This makes it compact for a variety of location mounts.

HYDRONIC B, D, M & L Series Coolant Heaters

The Hydronics range from 12 kW/42,000 BTUs up to 35 kW/120,000 BTUs in a boxed configuration. These units have an automatic altitude compensation, are available in 12 or 24-volt models and come with accessories such as a spark arrestor. They are compact for a variety of location mounts. The M Series has multiple speeds that reduce amp draw in lower ranges.

Control Options 

  • Easystart & Easystart Pro Controllers
  • 7 Day-Timers*
  • Programmable Timer
  • Push/Pull Switch
  • Thermostat*
  • Auto Shut-Off Switch

Easy to Operate

Eberspaecher heaters operate as miniature furnaces that are independent of the engine, utilizing the unit’s own small engines to produce heat.

Efficient

Hydronic units heat the coolant, then circulate it to warm the engine and heat exchangers to near operating temp and can be sized to provide auxiliary heat for other critical fluids. 

AIRTRONIC heaters can provide ample heat to the cab, mobile work stations, crew shelters, etc., circulate air to applicable compartments, all without idling the engine.

Productive

Using timer controls, heaters can be switched on to begin engine preheating at preset intervals, allowing operators to go directly to work upon arrival.

Arctic Traveler Canada (ATC) is proud to be an Eberspaecher Master Stocking Distributor (MSD) and offers the complete range of Espar products to the truck, bus, marine, automotive/pick-ups, off-highway, forestry, mining and military markets.


ESPAR Heater Tip – Regardless of the season, run the heater every month for a minimum period of 15 minutes. This will help the heater burn away any combustion residue in the burner chamber, prevents corrosion in the waterjacket and decay of “O” rings. It also ensures that fuel in the lines to the heater does not gel and solidify and that the heater will start reliably when the heating season arrives.

See our Blog ATCNEWS for Technical News and Preventative Maintenance Tips and for more information on these and other heating products, call us today at 1-800-295-4156.

Other useful Technical posts
Airtronic Heaters Preventative Maintenance
Hydronic Heaters Preventative Maintenance
Carbon Build up – How to check and remove