Tag: Espar Airtronic Heater

Espar Cargo Heaters for delivery vehicles

Preheaters for Vans, Multi-Temp Trailers & Trailer Bodies

Espar cargo heaters provide heat for vans, multi-temp trailers and trailer bodies. These air heaters maintain desired temperatures for cargo without using engine heat.
View brochure here

AIRTRONIC D5 Espar cargo heaters - Heat van, multi-temp trailers and trailer bodies mwithout using engine heat.

  • Van bodies 20′ long, maintains 40°F (4°C) cargo temperatures.
  • Outside temperatures -20°F (-29°C)
  • Insulation – minimum 2″ polyurethane. 

D8LC

  • Van bodies 30′ long, maintains 40°F (4°C) cargo temperatures.
  • Outside temperatures -20°F (-29°C)
  • Insulation – minimum 2″ polyurethane.

Other heaters are also suitable for larger or more severe applications. Consult our CSR’s for recommendations.

The most important advantages:

  • Electronically controlled temperature regulations which maintain optimum cargo area temperatures.
  • High volume heat output which provides faster heat recuperation after stops high air flow ensures good even heat distribution.
  • Independent of engine heat, low power draw reduces demands on batteries.

Eberspaecher heaters operate as miniature furnaces that are independent of the engine, utilizing the unit’s own small engine and batteries to produce heat.
Airtronic heaters draw in either cool room air or outside air, heat this up and then deliver it to the interior of the vehicle. Airtronic Air heaters are an excellent option for commercial vehicles of every type.

Need an Espar heating solution for your Application?
Arctic Traveler Canada (ATC) is proud to be an Eberspaecher Master Stocking Distributor (MSD) and offers the complete range of Airtronic and Hydronic Heaters. Whether you need one heater or a skid load, replacement parts or technical support on any Eberspaecher Airtronic and Hydronic Heater, contact us
We look forward to showing you how 50+ years of experience can add value to your company’s bottom line!

Arctic Traveler Canada, the mobile climate control specialist – Call 1-800-295-4156 for more information or visit us here.
Read more about Eberspaecher heaters at the links below.
Eberspaecher heaters updates make them even better
Preheating from Eberspaecher
Eberspaecher D5 S3 Heaters
Eberspaecher Hydronic heaters

Espar Heaters: Updates make them even better

Airtronic S2/M2 – The new Airtronic family

The new Airtronic family is the logical further development of the successful Eberspächer air heater. With its robust components and the latest control system, the Airtronic now features both functional expansions and a longer service life.

The new Airtronic is equipped with automatic altitude adjustment as standard. A new brushless motor has extended the service life to 5,000 hours. This new motor, a modern control system and the use of the latest metering pump technology also improve the acoustics. Furthermore, the new Airtronic uses the pioneering Eberspächer CAN bus technology.


Advantages:Introducing the S2/M2 - A new brushless motor extends the service life to 5,000 hours, automatic altitude adjustment  and the latest metering pump technology also improve the acoustics.

  • Interfaces: CAN, LIN (only 12 V), S+
  • Service life 5,000 h
  • Brushless motor
  • Use of the latest EasyStart Pro and EasyStart Web control units
  • Diagnostics and parameter assignment via EasyScan
  • Starting capability down to –46 °C
  • Stepless heating performance control
  • Noise emissions optimized
  • Use of acoustically improved metering pump
  • Integrated altitude sensor:
    – Automatic altitude adjustment up to 3,000 m
    – Optimized combustion

Additional features:

  • Universal installation kit for all versions
  • Air scoops provided separately to the installation kit
  • Metering pump included in delivery with Airtronic S2/M2
  • Identical to Airtronic 1:
    – installation positions
    – repair and spare parts
    – installation space and mechanical interfaces (air, exhaust and combustion air)
  • Heating-air connection diameters:
    – 2 kW: Ø 60 mm and Ø 75 mm
    – 4 kW: Ø 75 mm and Ø 90 mm
  • ADR compatibility of the 24 V versions


Hydronic S3 Economy/Commercial – now even more versatile

The CAN/switching plus version of the Hydronic S3 Economy is the direct successor to the previous CAN/LIN version and is compatible with the Eberspächer EasyStart CAN-bus-compatible control unit family that will be available.

The new switching plus input also ensures compatibility with all other control units that output an S+ switch-on signal. The new Hydronic S3 Commercial rounds off the product family with a 24-volt version for commercial applications. It will also be available in a 5.6 kW Power version for commercial applications for the first time, making it unrivaled on the market.


Advantages:Hydronic S3 Economy/Commercial

  • Interfaces: CAN and S++
  • Economy: service life 3,000 h 
  • Commercial: service life 5,000 h
  • Compatibility with all new and many conventional control units
  • New 24-volt heater for commercial applications
  • NEW: Power version with 5.6 kW heating performance
  • Very large output range
  • Utilization of residual heat through heating circuit run-on control
  • Stepless heating performance control
  • Noise emissions optimized

Additional features:

  • Economy: gasoline (also E10) and diesel (also B30)
    Commercial: diesel (also B30)
  • Diagnostic display via EasyStart TP 7.1 control units, as well as via EasyStart CAN-based control units
  • Economy: suitable for altitudes up to 1,500 m above sea level; altitude adjustment can be activated manually above 1,500 m with EasyStart Pro
    Commercial: automatic altitude adjustment up to 3,000 m above sea level
  • Connection diameters: water 20 mm, exhaust gas 24 mm, combustion air 20 mm
  • ADR compatible with EasyStart Pro (with “Commercial” version)

Need an Espar heating solution for your Application?
Arctic Traveler Canada (ATC) is proud to be an Eberspaecher Master Stocking Distributor (MSD) and offers the complete range of Airtronic and Hydronic Heaters. Whether you need one heater or a skid load, replacement parts or technical support on any Eberspaecher Airtronic and Hydronic Heater, contact us. We look forward to showing you how 50+ years of experience can add value to your company’s bottom line!
Arctic Traveler Canada, the mobile climate control specialist – Call 1-800-295-4156 for more information or visit us here.



Preheating from Eberspaecher


Eberspaecher’s AIRTRONIC Air Heaters
Eberspaecher’s air heaters are independent of both the engine and the vehicle’s own heat balance. They draw in either cool room air or outside air, heat this up and then deliver it to the interior of the vehicle. Air heaters are an excellent option for commercial vehicles of every type.
Eberspaecher’s HYDRONIC Coolant Heaters

Eberspaecher’s coolant heaters work independently of the engine and thus offer a double plus: preheating the vehicle’s passenger compartment as well as the engine. The heaters are integrated into the cooling system of the engine. The thermal energy gained is then distributed through the vehicle’s own heat exchanger as forced hot air and this heats the interior of the vehicle via existing air vents. The engine is warmed up with the residual heat in the cooling water.

The Heaters for Commercial and Industrial Applications

Eberspaecher Air and Coolant heater kits can be customized to suit your specific needs. From units that are boxed for protection to controllers that can provide flexibility to your operation! These heaters are Bio Diesel Compatible and available in both 12 or 24 volts. ATC is your MSD for preheating solutions on a variety of applications. Espar Airtronic & Hydronic heaters from 7500-120,000 BTU's

  • Eliminate cold engine starts
  • Reduce idling fuel cost
  • Engine and fluid preheating
  • Cab and compartment heating
  • Minimize diesel exhaust emission
  • Defrosted windows
  • Crew shelter
  • Automatic altitude adjustment
  • CARB approved / EPA verified

Different Configurations for Different Applications

AIRTRONIC D2, B4, D4, B5, D5, D8 and Echo8 Air Heaters

AIRTRONIC units range from 2 kW / 7,500 BTUs to 5 kW / 18,800 BTUs and are available with our Digi-controller, which has an internal ambient air temperature sensor for precise compartment heating. This makes it compact for a variety of location mounts.

HYDRONIC B, D, M & L Series Coolant Heaters

The Hydronics range from 12 kW/42,000 BTUs up to 35 kW/120,000 BTUs in a boxed configuration. These units have an automatic altitude compensation and are available in 12 or 24-volt models and come with accessories such as a spark arrestor. They are compact for a variety of location mounts. The M Series has multiple speeds that reduce amp draw in lower ranges.

Control Options 

  • Indicates on-board diagnostics capability
  • 7 Day-Timers*
  • Programmable Timer
  • Push/Pull Switch
  • Thermostat*
  • Auto Shut-Off Switch
  • Digi-Controller

Easy to Operate

Eberspaecher heaters operate as miniature furnaces that are independent of the engine, utilizing the unit’s own diesel and batteries to produce heat.

Efficient

Hydronic units heat the coolant, then circulate it to warm the engine and heat exchangers to near operating temp and can be sized to provide auxiliary heat for other critical fluids. Eberspaecher air heaters heat air directly and circulate air to applicable compartments.

AIRTRONIC heaters can provide ample heat to the cab, mobile work stations, crew shelters, etc., all without idling the engine.

Productive

Using timer controls, heaters can be switched on to begin engine preheating at preset intervals, allowing operators to go directly to work upon arrival.

Arctic Traveler Canada (ATC) is proud to be an Eberspaecher Master Stocking Distributor (MSD) and offers the complete range of Espar products to the truck, bus, marine, automotive/pick-ups, off-highway, forestry, mining and military markets. See our Blog ATCNEWS for Technical News and Preventative Maintenance Tips and for more information on these and other heating products, call us today at 1-800-295-4156.

MTO rebates on Espar Airtronic heaters

The Ontario government has resurrected the Green Commercial Vehicle Program (GCVP) providing rebates to qualifying businesses on Espar Airtronic heaters purchases. 
The MTO has announced that the application form for the GCVP is now online through Grants Ontario. Applicants can apply for the program by logging in and submitting an application using the Grants Ontario Portal.

The GCVP was championed by OTA as a way for the industry to receive the benefit of funds carriers pay through carbon pricing. The program provides rebates towards the purchase of alternative-fuel vehicles and fuel-saving devices, including natural gas and electric technologies, hence the rebate on Espar Airtronic heaters.

Members are encouraged to take part in the webinar by sending an RSVP to GCVP@ontario.ca, MTO will share the webinar details directly with participants.

Members with additional questions regarding program details, the application process or the Grants Ontario system can contact GCVP@ontario.ca for more information.

The Green Commercial Vehicle Program (GCVP) is an incentive-based program for the commercial transportation sector, where incentives are provided upon proof of purchase as outlined below:

• For the purchase of alternative fuel vehicles such as electric, natural gas or diesel-natural gas dual fuel vehicles, incentive amounts range from 15-50% of the incremental purchase cost of an eligible vehicle as compared to an equivalent conventional fuel vehicle.

• For fuel saving devices, the incentive amount is 30-50% of the purchase and installation cost, of the aerodynamic device, anti-idling device or electric refrigeration unit. See the list of approved devices.

The GCVP will also include a stream of funding for Commercial Transportation Innovation Pilots. Further details on this portion of the program will be available in 2018.

All eligible purchases made on or after September 1, 2017, will be eligible to apply for incentives. Purchases made on or before March 31, 2018, will be eligible for an early adopter incentive worth an additional 10% for up to 10 vehicles or devices.

Please complete the Electronic Funds Transfer (EFT) form and submit the completed form directly to Ontario Shared Services at the address noted in the EFT guide. (link available in Program Guidelines section below)

Applicants must also enroll in the One-Key (Transfer Payment Common Registry) to establish a Transfer Payment Account. Once notified, the applicant must then access Grants Ontario to enter the GCVP application system.

Applications to the Green Commercial Vehicles Program must be submitted electronically through the Grants Ontario System (GOS).