Tag: Truck Heating Solutions

ESPAR Heaters : How to check & remove Carbon build up

Preventative Maintenance for ESPAR Airtronic and Hydronic Heaters. How to determine and remove carbon build up in the burner.
How To Determine and Remove Excessive Carbon Build up in Espar Heaters.


One way to identify if the burner in your Espar Heaters may have excessive carbon build up is to look into the exhaust outlet of the heater with the flexible exhaust pipe removed.
This may be difficult while the heater is installed due to its location but with the assistance of a mirror and a flashlight it can be accomplished.
Intake and Exhaust outlets of the Espar heaters
Another way to find out if the burner has excessive carbon build up, is to inspect the glow pin screen chamber and look into the burner as much as possible.
If the bottom of the glow pin screen chamber is blocked or partially restricted it may be an indication that the burner could have carbon build up.
Glow pin chamber in Espar Heaters.
When Espar heaters have failed to start due to excessive carbon build‐up in the burner, the heater may produce a Fault Code 52 which is Safety Time Exceeded.
This indicates that the heater was not able to start within its allowed start up time. This may also be accompanied by excessive white smoke.

CAUTION:
During the cleaning process of the heater it is likely that hot pieces of carbon will come out of the exhaust pipe of the heater. Make sure that there is nothing on or around the exhaust that could be ignited by these particles. For example, oily rags, fuel spills, the kerosene container or any other flammable material or substance.
Do not look into exhaust pipe or expose unprotected part of your body to the exhaust outlet.

It is the responsibility of the technician who is performing this method of carbon removal to ensure all safety regulations for working with fuel, are met during the procedure. 
Below is a picture of a burner that was cleaned using Kerosene.
Pictures of the burner in your Espar Heaters before and after it was cleaned to optimize performance and extend life span.


Alternate method of cleaning Espar Heaters

  • Remove the glow pin using the glow pin removal tool, Espar part number 25 2069 01 03 03 and replace the glow pin screen, Espar part number 25 2069 01 03 00. Make sure the ventilation hole on the side of glow pin chamber is completely clear and not restricted or plugged. Clean the glow pin screen chamber with a brush before inserting the new glow pin screen.
  • Reassemble the heater back to operating condition.
  • Make sure all sources of ignition are kept a safe distance away from the fuel lines and the container of kerosene.
  • Remove fuel line from inlet side of fuel pump.
  • Replace this fuel line with another section of fuel line which is an appropriate length and secure one end to inlet side of fuel pump and other end into a flammable safe container of Kerosene. Espar plastic fuel tank or another approved container may be used.
  • Make sure that the fuel lines and fuel container are not near any sources of heat. Make sure the fuel lines do not touch the exhaust systems of the vehicle, or the Heater.
  • Ensure end of fuel line is securely fastened to fuel pump as to not allow any air to enter fuel system during operation.
  • Ensure Kerosene container is not placed near the air intake or exhaust of heater; this will prevent any fumes to enter combustion chamber and also prevent any sparks or hot particles from igniting the Kerosene.
  • Turn on the heater. This may take several attempts to prime fuel lines.
  • Adjust Thermostat or Mini Controller to the highest temperature set point. If necessary, open vehicle doors allowing cool air in. This will ensure that the heater runs in boost.
  • Some heaters with excessive carbon build up may not start using kerosene and will give a Fault Code 52: Safety Time Exceeded. These heaters may require that they be disassembled and cleaned manually.
  • Allow heater to run in boost for approximately 25‐30 minutes.
  • Turn heater off
  • After the heater has completed its cool down cycle, the fuel line can be removed from fuel pump and container. Container can be removed from the area and safely stored away.
  • Reinstall original fuel line back to inlet side of fuel pump.
  • The heater can now be operated as usual.
Arctic Traveler Canada is a MSD (Master Stocking Distributor) for Eberspaecher products and a technical leader actively involved in projects driving the mobility of tomorrow. Call ATC @ 1-800‐295‐4156 for all your Heater and AC needs.

Airtronic Heaters Preventative Maintenance
Hydronic Heaters Preventative Maintenance

Espar Cargo Heaters for delivery vehicles

Preheaters for Vans, Multi-Temp Trailers & Trailer Bodies

Espar cargo heaters provide heat for vans, multi-temp trailers and trailer bodies. These air heaters maintain desired temperatures for cargo without using engine heat.
View brochure here

AIRTRONIC D5 Espar cargo heaters - Heat van, multi-temp trailers and trailer bodies mwithout using engine heat.

  • Van bodies 20′ long, maintains 40°F (4°C) cargo temperatures.
  • Outside temperatures -20°F (-29°C)
  • Insulation – minimum 2″ polyurethane. 

D8LC

  • Van bodies 30′ long, maintains 40°F (4°C) cargo temperatures.
  • Outside temperatures -20°F (-29°C)
  • Insulation – minimum 2″ polyurethane.

Other heaters are also suitable for larger or more severe applications. Consult our CSR’s for recommendations.

The most important advantages:

  • Electronically controlled temperature regulations which maintain optimum cargo area temperatures.
  • High volume heat output which provides faster heat recuperation after stops high air flow ensures good even heat distribution.
  • Independent of engine heat, low power draw reduces demands on batteries.

Eberspaecher heaters operate as miniature furnaces that are independent of the engine, utilizing the unit’s own small engine and batteries to produce heat.
Airtronic heaters draw in either cool room air or outside air, heat this up and then deliver it to the interior of the vehicle. Airtronic Air heaters are an excellent option for commercial vehicles of every type.

Need an Espar heating solution for your Application?
Arctic Traveler Canada (ATC) is proud to be an Eberspaecher Master Stocking Distributor (MSD) and offers the complete range of Airtronic and Hydronic Heaters. Whether you need one heater or a skid load, replacement parts or technical support on any Eberspaecher Airtronic and Hydronic Heater, contact us
We look forward to showing you how 50+ years of experience can add value to your company’s bottom line!

Arctic Traveler Canada, the mobile climate control specialist – Call 1-800-295-4156 for more information or visit us here.
Read more about Eberspaecher heaters at the links below.
Eberspaecher heaters updates make them even better
Preheating from Eberspaecher
Eberspaecher D5 S3 Heaters
Eberspaecher Hydronic heaters

Espar Heaters: Updates make them even better

Airtronic S2/M2 – The new Airtronic family

The new Airtronic family is the logical further development of the successful Eberspäecher air heater. With its robust components and the latest control system, the Airtronic now features both functional expansions and a longer service life.

The new Airtronic is equipped with automatic altitude adjustment as standard. A new brushless motor has extended the service life to 5,000 hours. This new motor, a modern control system and the use of the latest metering pump technology also improve the acoustics. Furthermore, the new Airtronic uses the pioneering Eberspäecher CAN bus technology.


Advantages:

  • Interfaces: CAN, LIN (only 12 V), S+Introducing the S2/M2 - A new brushless motor extends the service life to 5,000 hours, automatic altitude adjustment and the latest metering pump technology also improve the acoustics.
  • Service life 5,000 h
  • Brushless motor
  • Use of the latest EasyStart Pro and EasyStart Web control units
  • Diagnostics and parameter assignment via EasyScan
  • Starting capability down to –46 °C
  • Stepless heating performance control
  • Noise emissions optimized
  • Use of acoustically improved metering pump
  • Integrated altitude sensor:
    – Automatic altitude adjustment up to 3,000 m
    – Optimized combustion

Additional features:

  • Universal installation kit for all versions
  • Air scoops provided separately to the installation kit
  • Metering pump included in delivery with Airtronic S2/M2
  • Identical to Airtronic 1:
    – installation positions
    – repair and spare parts
    – installation space and mechanical interfaces (air, exhaust and combustion air)
  • Heating-air connection diameters:
    – 2 kW: Ø 60 mm and Ø 75 mm
    – 4 kW: Ø 75 mm and Ø 90 mm
  • ADR compatibility of the 24 V versions


Hydronic S3 Economy/Commercial – now even more versatile

The CAN/switching plus version of the Hydronic S3 Economy is the direct successor to the previous CAN/LIN version and is compatible with the Eberspäecher EasyStart CAN-bus-compatible control unit family that will be available.

The new switching plus input also ensures compatibility with all other control units that output an S+ switch-on signal. The new Hydronic S3 Commercial rounds off the product family with a 24-volt version for commercial applications. It will also be available in a 5.6 kW Power version for commercial applications for the first time, making it unrivaled on the market.


Advantages:Eberspaecher Hydronic S3 Commercial

  • Interfaces: CAN and S++
  • Economy: service life 3,000 h 
  • Commercial: service life 5,000 h
  • Compatibility with all new and many conventional control units
  • New 24-volt heater for commercial applications
  • NEW: Power version with 5.6 kW heating performance
  • Very large output range
  • Utilization of residual heat through heating circuit run-on control
  • Stepless heating performance control
  • Noise emissions optimized

Additional features:

  • Economy: gasoline (also E10) and diesel (also B30)
    Commercial: diesel (also B30)
  • Diagnostic display via EasyStart TP 7.1 control units, as well as via EasyStart CAN-based control units
  • Economy: suitable for altitudes up to 1,500 m above sea level; altitude adjustment can be activated manually above 1,500 m with EasyStart Pro
    Commercial: automatic altitude adjustment up to 3,000 m above sea level
  • Connection diameters: water 20 mm, exhaust gas 24 mm, combustion air 20 mm
  • ADR compatible with EasyStart Pro (with “Commercial” version)

Need an Espar heating solution for your Application?
Arctic Traveler Canada (ATC) is proud to be an Eberspaecher Master Stocking Distributor (MSD) and offers the complete range of Airtronic and Hydronic Heaters. Whether you need one heater or a skid load, replacement parts or technical support on any Eberspaecher Airtronic and Hydronic Heater, contact us. We look forward to showing you how 50+ years of experience can add value to your company’s bottom line!
Arctic Traveler Canada, the mobile climate control specialist – Call 1-800-295-4156 for more information or visit us here.



Espar Hydronic S3 Heater

Eberspaecher, the leading system developer and supplier of vehicle Airtronic and Hydronic heaters, has expanded its product portfolio with the new Hydronic S3 Economy (5kW) pre-heater. The Hydronic S3 water heater impresses, thanks to its compact dimensions and flexible installation options for simple retrofitting in a large number of vehicle models. As a ground-breaking all-in-one solution with comprehensive peripheral devices, it offers installation partners many practical advantages.

Never scrape ice again. Get in your vehicle and feel comfortable. Enjoy perfect all-around visibility. Arrive safely. And along the way, protect the environment and your car with a pre-heated engine. An Eberspäecher pre-heater means the ideal combination of luxury, comfort and safety. Eberspäecher water heaters run independently from the engine and make for twice the benefit: pre-heating the car cabin and the engine. The Hydronic S3 Economy is integrated into the cooling water circuit of the engine. The generated heat is picked up by the vehicle’s heat exchanger and is dispensed accurately through present air ducts into the car cabin as warm air. Using the residual heat in the cooling water circuit, the engine is heated. During summers, an Eberspäecher pre-heater can be used to ventilate the car interior.
The Hydronic S3 Economy is a compact water heater that satisfies the latest requirements of all vehicle segments. Its compact dimensions and fantastic flexibility during installation are truly impressive. The Espar Hydronic S3  uses CAN bus technology and is made with robust components.By launching the Hydronic S3 Economy, Eberspächer introduces a compact water heater into the market that satisfies the latest requirements of all vehicle segments. Its compact dimensions and fantastic flexibility during installation are truly impressive. In addition, the Hydronic S3 Economy uses pioneering Eberspächer CAN bus technology and is made with robust components.

With the third generation of its Hydronic series, Eberspaecher is offering an easy-to-operate preheater with step-less heating power control. The compact and robust coolant heater works efficiently with all popular types of fuel. Due to its robust construction – with an encapsulated fan motor and the separation of cold and hot components – it is designed to simplify installation and for longevity. A high IP protection class also secures the unit from the ingress of water during high-pressure or steam jet cleaning. The new water spigots are fully rotatable by 360 degrees and are fully replaceable, they ensure convenient and rapid fitting in a range of installation positions. Optimized brackets enable the pre-heater to be mounted anywhere in the smallest possible space and to be attached rapidly and permanently.
The Hydronic S3 is a compact water heater that satisfies the latest requirements of all vehicle segments. Its compact dimensions and fantastic flexibility during installation are truly impressive. The Espar Hydronic S3  uses CAN bus technology and is made with robust components.
With the new EasyScan, diagnostic and service tool, workshop staff can analyze the operating condition of the pre-heater easily and quickly.
• Compact, efficient water heater • Innovative peripheral devices and new diagnostic device • Simplified installation • CARB approved

Espar Hydronic Coolant Heaters

Espar Hydronic coolant heaters

Offering affordable preheating of engine, fuel, and hydraulic systems as well as supplemental cab heating without idling the vehicle. They provide affordable heating solutions for trucks, off-road equipment, boats and buses.

Hydronic S3 – The newest and most compact heater on the market that satisfies the latest requirements of all vehicle segments. Its compact dimensions and fantastic flexibility during installation are truly impressive. To learn more about this little marvel, watch the Introduction & Technical overview videos on our Youtube channel, ATCTV.

The coolant or hydronic S3 heater works efficiently with all popular types of fuel. Due to its robust construction – with an encapsulated fan motor and the separation of cold and hot components – it is designed for longevity.By launching the Hydronic S3 Economy, Eberspächer introduces a compact water heater into the market that satisfies the latest requirements of all vehicle segments. Its compact dimensions and fantastic flexibility during installation are truly impressive. In addition, the Hydronic S3 Economy uses pioneering Eberspächer CAN bus technology and is made with robust components.

Hyrdronic D5 Series offers affordable preheating of engine, fuel, and hydraulic systems as well as supplemental cab heating without idling the vehicle. Units function like hot water furnaces, utilizing the vehicle’s own fuel and power supply to produce heat. The heater’s coolant pump then circulates the engine’s coolant to transfer the heat to the engine block. Applications include: trucks, off-highway equipment, boats, and buses. Units are easy to install and do not require electrical plug-ins.
Espars Hydronic D5 coolant heater series offers affordable preheating of engine, fuel, and hydraulic systems as well as supplemental cab heating without idling the vehicle.  The heater’s coolant pump then circulates the engine’s coolant to transfer the heat to the engine block.The Hydronic D5 coolant heaters work independently of the engine and thus offer a double plus: pre-heating the vehicle's passenger compartment and the engine.

Hydronic M-II series is powerful, compact, lightweight, and rugged in design. This series of heaters are ideal for providing engine, fuel, and hydraulic preheat for off-highway equipment as well as engine and supplemental cabin heat for motorcoachs and school buses. They are available in 1 size with 4 power levels and are diesel or bio-diesel compatible.

Espar Hydronic M-II series is powerful, compact, lightweight, and rugged in design. This series of heaters are ideal for providing engine, fuel, and hydraulic preheat for off-highway equipment as well as engine and supplemental cabin heat for motorcoachs and school buses.Espars Hydronic M-II series of heaters is available in one size with the option of four power levels and are diesel or bio-diesel compatible. Units can be boxed for protection against the elements and incorporate an automatic altitude compensation component, so you can use your heater anywhere with ease.

Hydronic L-II series is available in 1 size with 4 power levels for the largest coaches, boats and off-road engines. These heaters provide engine, fuel and hydraulic preheat and can be incorporated into a coaches heating system to provide supplemental heat   These large HYDRONIC pre-heaters can be boxed for protection against the elements and offer innovative amp management solutions utilizing our multifunction switch.
These large Espar Hydronic pre-heaters  are available in one size with the option of four power levels and can be boxed for protection against the elements.Espar’s HYDRONIC L-II series are for the largest coaches, boats and off-road engines. These heaters provide engine, fuel and hydraulic preheat and can be incorporated into a coaches heating system to provide supplemental heat.

Arctic Traveler Canada (ATC) is proud to be an Eberspaecher Master Stocking Distributor (MSD) and offers the complete range of Airtronic and Hydronic heaters, the most comprehensive range of fuel operated air and coolant heater products available in today’s marketplace. Call 1-800-295-4156 for more information.

Espar Airtronic and Hydronic Heaters

Eastern Canada’s largest MSD wants to make this your best ESPAR season ever!

Arctic Traveler Canada (ATC) is proud to be an Eberspacher Master Stocking Distributor (MSD) and offers the complete range of products. Eberspaecher has the most comprehensive range of fuel operated air and coolant heater products available in today’s marketplace.

Arctic Traveler Canada (ATC) is proud to be an Eberspaacher Master Stocking Distributor (MSD) and offers the complete range of Airtronic and Hydronic Heaters. Eberspaecher has the most comprehensive range of fuel operated air and coolant heater products available in today’s marketplace.

Espar Airtronic and Hydronic Heaters

AIRTRONIC Air Heaters
Eberspaecher’s air heaters are independent of both the engine and of the vehicle’s own heat balance. They draw in cool room or outside air, heat this up and then deliver it to the interior of the vehicle. Air heaters are an excellent solution for commercial vehicles of every type.

HYDRONIC Coolant Heaters
Eberspaecher’s coolant heaters work independently of the engine and thus offer a double plus: pre-heating the vehicle’s passenger compartment and the engine. The heaters are integrated into the cooling system of the engine. The thermal energy gained is then distributed through the vehicle’s own heat exchanger as forced hot air and this heats the interior of the vehicle via existing air vents. The engine is warmed up with the residual heat in the cooling water.

In case you don’t already know about Arctic Traveler Canada’s enviable history with Eberspaecher, we’d like to tell you a little about who we are:

  • For over ten years, ATC has provided full warehousing, distribution service and sales support to Espar for all heaters across Eastern Canada.
  • ATC provides our own engineering team for when customer needs deviate from the norm.
  • ATC maintains three warehouses – MississaugaMontreal and Burlington (HQ). This ensures fast delivery of heaters and/or replacement parts & service.
  • ATC offers complete service, diagnostics and heater repair at all our locations and we also have our own Espar trained technicians who can assist you at your location.
  • ATC facilitates full Espar warranty support for every heater we sell, from a simple warranty claim to training your staff on how to process claims directly with Espar. 
  • ATC provides OEM style installs on chassis not factory equipped with heaters. This includes Espar’s full two year/2000 hour warranty on the heater.

Need an Espar heating solution for your Application?
Whether you need one heater or a skid load, replacement parts or technical support on any Espar Airtronic and Hydronic Heater, contact us.
We look forward to showing you how our 50+ years of experience can add value to your company’s bottom line!

Arctic Traveler Canada, the mobile climate control specialist – Call 1-800-295-4156 for more information or visit us here.


December Newsletter

xmas_garland66

Season Greetings We appreciate your business and extend a hearty thank you for the opportunity to serve you this past year. From All of Us here at Arctic Traveler Canada, we wish you and your family a Safe and Happy Holidays.


IMPORTANT CLOSED FOR INVENTORY
Our annual Inventory starts this Thursday Dec. 8th at 3pm to Friday Dec. 9th.
This is an “All Hands On Deck” effort, as such our phones lines will be closed and we’ll be unable to receive or process any orders.
Parts Orders can be emailed to atcparts@atc.ca and will be processed as soon as we’re able to. We apologize for any inconvenience caused.

Stocking stuffer Condenser Clearance – We’re overstocked on a select few and have reduced prices to $99-125 on 8 models. Limited Stock. No Reservations, All Sales Final and available as first come, first serve basis and ONLY while quantities last.

Just in time for the heating season. As an authorized master distributor, ATC recently hosted a Certified Technician Training course with Eberspacher’s Training Manager on the newly released Hydronic S3. Attended by our Ontario dealers, It was an informative day for all and we had the chance to put faces to names and share stories. To see more click here


Preventative Maintenance tips for Airtronic or Hydronic heaters?
Visit the Espar category at ATCNEWS for these and other heating tips.


Need a fluid warming solution
Arctic Fox and Thermex Fluid Warming Systems provide protection against cold weather fluid clouding and gelling with In-Tank or In-Line Heat Exchangers. These proven and cost effective products warm contents so they can properly flow or be easily pumped, eliminating costly and time consuming downtime as well as expensive component damage that frequently occur from cold-thickened fluids.
• Single probe heats up reservoirs from 1 to 80 gals (300 liters) capacity
• Multiple probes can be installed on large bulk tanks
• Eliminate idle equipment and wasted man-hours waiting for products to warm up
• Protect against hydraulic pump cavitation and burst hose lines
For more information, call us today at 1-800-295-4156

Need more heat and comfort? To view some of our Air, Coolant & Auxiliary heating solutions, click here From 7- 65,000 BTU’s, we carry a variety of mobile heating solutions to supplement your Gas or Diesel needs.

Advanced Temperature Control a division of Arctic Traveler Canada, has specialized in the engineering and manufacture of durable, vehicle engine powered mobile refrigeration and heating systems for safe delivery of your fresh and frozen products. Our line of Truck Refrigeration products has been continuously updated and improved to meet the requirements of today’s competitive markets. Watch video here.

ATC Connect – Parts Lookup and Cross Reference made easy
We know having the right part is paramount to getting the job done right and to help you through this process we present ATC CONNECTClick here to get access or speak with our Customer Service Reps to start utilizing this exciting and very useful tool.

ATC.CA is your gateway to so much. The Product Line page provides catalog downloads for the industry leading products we carry. Our blog ATCNEWS is where you’ll find best practices, technical tips and product knowledge. Missed a previous Newsletter? Not to worry, there’s a category for newsletters and ATCNEWS  is searchable.

Ordering Parts? Use atcparts@atc.ca or call us toll free at 1-800-295-4156. 
Our Customer Service Representatives will be happy to assist you. 
 

October Newsletter

Hello and Welcome to Fall. We hope you had an enjoyable summer.

If you haven’t already read it, MACS (Mobile Air Conditioning Society) member profile for September/October is ATC. This worldwide blog has been consistently honoured as one the best B2B automotive aftermarket blogs. Read the full interview with our company president for further insights into our world.

As the heating season approaches, the big news is the launch of the Eberspaecher Hydronic S3 heater. Thanks to its compact dimensions and flexible installation options, this state of the art heater impresses! Read the full details here to see how this little wonder works and watch the video on our youtube channel ATCTV While there check out the Airtronic Intro & Basics and the Hydronic Purpose and Function videos. 

ATC.ca is your gateway to so much. The Product Line page provides catalog downloads with pictures, overviews and specs. Our blog ATCNEWS is where you’ll find best practices, technical tips and product knowledge. This months feature is ESPAR Pre-season Maintenance tips for Airtronic & Hydronic Heaters and a Red Dot tech tip on Why you should do wintertime Preventative Maintenance on your A/C system? Find out more here. 

ATCNEWS has categories like A/C 101, Did you know, Heating, Tech Tips or vendor specific like Espar & RedDot. Missed something from a previous Newsletter? Not to worry,  ATCNEWS is searchable.

From 16-65,000 BTU’s, we carry a variety of mobile heating solutions to supplement your Gas or Diesel needs and provide you hours of comfort. To view some of our heating solutions, click here.

We want to take this opportunity to remind you to email or call us toll free at 1-800-295-4156, our Customer Service Representatives will be happy to assist you. 

The opinions expressed in this newsletter, do not necessarily reflect those of Arctic Traveler Canada.

Espar Hydronic S3 news release

State-of-the-art heating with the New Eberspaecher Hydronic S3 Economy (5kW) Pre-heater System

Eberspaecher, the leading system developer and supplier of vehicle heaters, is expanding its product
portfolio with the new Hydronic S3 Economy (5kW) pre-heater. The water heater impresses thanks to
its compact dimensions and flexible installation options for simple retrofitting in a large number of
vehicle models. As a ground-breaking all-in-one solution with comprehensive peripheral devices, it
offers installation partners many practical advantages.

With the new EasyScan, diagnostic and service tool, workshop staff can analyze the operating condition of the pre-heater easily and quickly.
• Compact, efficient water heater
• Innovative peripheral devices and new diagnostic device
• Simplified installation
• CARB approved
Hydronic S3 Economy (5kW)
Hydronic – Water & Electronic, Product line, water heater
S3 – Size and generation, Size (small) Generation 3
Economy – Marketing appendix, entry model
Compact and robust water heater for simple installation
With the third generation of its Hydronic series, Eberspaecher is offering an easy-to-operate preheater
with stepless heating power control. The coolant heater works efficiently with all popular types
of fuel. Due to its robust construction – with an encapsulated fan motor and the separation of cold and
hot components – it is designed for longevity.

A high IP protection class also secures the unit from the ingress of water during high-pressure or steam jet cleaning.
The new water spigots are fully rotatable by 360 degrees and are fully replaceable, they ensure convenient and rapid fitting in a range of installation positions.

Optimized brackets enable the pre-heater to be mounted anywhere in the smallest possible space and to be attached rapidly and permanently.

Click here for full release

Arctic Traveler Canada (ATC) is proud to be an Eberspacher Master Stocking Distributor (MSD) and offers the complete range of Espar products to the truck, bus, marine, automotive/pick-ups, off-highway, forestry, mining and military markets.
Call 1-800-295-4156 for more information.

Hydronic Heater-Introducing the S3

Eberspaecher, the leading system developer and supplier of vehicle heaters, is expanding its product portfolio with the new Hydronic heater, the S3 Economy (5kW) pre-heater. The water heater impresses thanks to its compact dimensions and flexible installation options for simple retrofitting in a large number of vehicle models. As a ground-breaking all-in-one solution with comprehensive peripheral devices, it offers installation partners many practical advantages. With the new EasyScan, diagnostic and service tool, workshop staff can analyze the operating condition of the pre-heater easily and quickly.
• Compact, efficient water heater • Innovative peripheral devices and new diagnostic device • Simplified installation • CARB approved

Compact and robust water heater for simple installation

With the third generation of its Hydronic heaters, Eberspaecher is offering an easy-to-operate preheater with stepless heating power control. The coolant or hydronic heater works efficiently with all popular types of fuel. Due to its robust construction – with an encapsulated fan motor and the separation of cold and hot components – it is designed for longevity. A high IP protection class also secures the unit from the ingress of water during high-pressure or steam jet cleaning. The new water spigots are fully rotatable by 360 degrees and are fully replaceable, they ensure convenient and rapid fitting in a range of installation positions. Optimized brackets enable the pre-heater to be mounted anywhere in the smallest possible space and to be attached rapidly and permanently.

Click here to see how the Hydronic S3 works


Espar's new fuel fired coolant or Hydronic heater, the S3 economy

Arctic Traveler Canada (ATC) is proud to be an Eberspacher Master Stocking Distributor (MSD) and offers the complete range of products. Eberspaecher has the most comprehensive range of fuel operated air and coolant heater products available in today’s marketplace with affordable heating solutions for on & off-road equipment, small trucks, forestry, mining, military and so much more. Offering close attention to detail and technical design, Eberspacher leads the industry in Excellence in Supporting Product Applications and Reliability. 

For more info call 1-800-295-4156 our CSR’s are waiting to help or visit our website.  Arctic Traveler Canada (ATC), specialist in mobile climate control.